Data Logging Solutions

Influx Technology provide market leading, easy to use vehicle CAN data loggers designed to work on multiple applications that can be taken ‘Out the box’ and be logging data within minutes:

Typical Applications

  1. OEM fleet durability testing.(on and off highway)
  2. Engineering development and powertrain calibration.
  3. Vehicle component testing.
  4. Bench testing.
  5. After-market customer care. (Collecting data on customer vehicles)

With Wi-Fi and 3G options you can keep connected.

Our data logger key features include:

  1. Dialog Configurator software is downloadable free of charge.
  2. Recorded data is stored on either a SDHC or SDXC card in PC readable format. No additional extraction tool or application is required.
  3. Silent mode is supported, listening on the CAN Bus with no interference.
  4. Power can be supplied from either the vehicle power or from the USB.
  5. The inbuilt real time clock with battery backup ensures that recorded data is timestamped.
  6. The Rebel data loggers support both a deep sleep mode and the WakeOnCAN function. These essential features of any flight recorder allows our data loggers to be left unattended on a vehicle without the risk of draining the vehicle battery.
  7. Our Rebel data loggers will operate at voltages below the rest of the vehicle electronic modules, so they will capture everything even during a cold start power up. (Input power range 4.5V to 36V)
  8. Module Analyser can be used for on-line UDS diagnostics and also CAN, LIN and FlexRay message Analysis.
  9. Compatible with applications written for the SAE J-2534 Pass-Thru protocol. You can use the Rebel data loggers with other third party software applications or your own applications.
  10. Communication channels include up to 7 CAN buses, K-Line, 3 LIN, LAN and 2 FlexRay channels
  11. Standard list of engine parameters can be acquired on almost all vehicles manufactured post 2007 model year.
  12. Options include highly accurate GPS, 3G, Wi-Fi and XYZ accelerometer.
  13. USB connection is isolated ensuring your data is protected.
  14. Documentation and Software can be downloaded at http://www.influxtechnology.com/downloads/

Supported Protocols
J1939, UDS (ISO14229, ISO15765-1, ISO15765-2), xCP (xCPonCAN, xCPonFlexRay), CCP

We offer a complete data logging solution for vehicle networks and sensor data.

Network Analyser and Diagnostics

A cost effective and professional CAN bus analysis and automotive UDS diagnostic tool.

Module Analyser is a 5 in 1 easy to use CAN bus analyser with the following advantages:

  1. Automotive OBD ISO15765-1 and ISO 15765-2 Scan tool and J1939 functions
  2. Automotive UDS support ISO14229
  3. Integrated ODX/MDX editor
  4. CAN bus, LIN and FlexRay analysis via DBC/LDF/Fibex files
  5. Data acquisition and logging

Key features include:

  1. Supports most Pass-Thru SAE J2534 hardware devices.
  2. Create and edit your diagnostic ODX files within Module Analyser.
  3. Supported file formats ASAM A2L, ODX, DBC, LDF and Fibex.
  4. Ability to capture and view CAN, LIN and FlexRay network traffic.
  5. Live signal CAN, LIN and FlexRay monitoring and recording.
  6. Data file exchangeable with include MS Excel®, Matlab®, NCode® and National Instruments®
  7. Configure and transmit periodic CAN messages.
  8. View data on oscilloscope and post analysis tool.
  9. Supports diagnostic OBDII scan modes.
  10. Advanced UDS diagnostic functions (ISO15765-1, ISO15765-2 and ISO14229).
  11. Scripting editor.
  12. Module reprogramming by ISO14229.

Instrumentation Solutions

The Influx Technology K series range is our new generation of automotive instrumentation modules. Highly accurate sensor measurement data is transmitted periodically on the CAN Bus enabling multiple modules to be connected together. The stackable K series range is an ideal solution for applications that require a large number of sensor data inputs recorded synchronously with vehicle network data.

The easy to use K series measurement modules can be applied, for measurement applications in power train, component testing, vehicle electronics, benchmarking etc.

Key features include:

  1. K-Box suitable for measuring analog, thermocouples, PWM and digital inputs.
  2. K-TC16 and K-TC32 suitable for measuring multiple thermocouple inputs. (K, J and T).
  3. K-Volt suitable for generating voltage, current, PWM and digital signals.
  4. Stackable ABS enclosure.
  5. Freely distributable configuration and calibration software.
  6. All devices have WakeOnCAN capability and power down mode.
  7. Integrates with any CAN interface device that supports the DBC file format.

All instrumentation is supplied with calibration software

Powertrain Calibration Management

Influx Technology LogiProject is an essential process tool for handling complex calibration projects with multiple variants. LogiProject helps control small and large powertrain calibrations, enables better teamwork collaboration and ensures full calibration traceability.

Prevent overwrites and produce conflict free datasets.

  1. Scalability from small calibration teams to large multi-functional organizations.
  2. Reliable data calibration management tool with powerful rule checking to prevent errors.
  3. Easy collaboration between engineering teams and the calibration administrator.
  4. Produce reliable calibrations faster, with automatically export of variant binary files.
  5. Full accountability of your calibrations.

Remote Fleet Management

Easy data streaming using Rebel data loggers gives you fleet management statistics and continuous streamed data all of the time. Using StreamLog you can see events as they occur in the field and react rapidly.

StreamLog is scalable so whether you have a small or large fleet there is a suitable option available.

Some of the benefits

  1. Avoid potential warranty costs – With early detection of DTC events
  2. Easy intuitive remote control – Fleet data logging is wirelessly controlled by StreamLog. Saving time and increasing the reliability of the testing process.
  3. Real time data streaming and position tracking – Real time tracking of data from the vehicle with synchronised positioning via GPS.
  4. Reports by email – StreamLog will automatically send you reports updating you on the latest fleet activity and statistics. Email alerts on events – such as DTC occurrences.

Real Data desktop HiL Simulation

Normally you would expect to capture only recorded data on a vehicle test. Influx Technology Replay provides a solution to recording real world data, replaying the data and extracting data from all functions. Even functions not recorded!

Using Replay you can extract the data over and over and UNDERSTAND everything.

Replay is a desktop HiL designed for the calibration. It does not rely on a plant model.

Advantages:

  1. Real World Data used for simulation, no inaccurate plant model.
  2. Small, compact and easy to operate
  3. Powertrain calibration investigations possible
  4. Easy to validate

Data Logging Solutions

Influx Technology provide market leading, easy to use vehicle CAN data loggers designed to work on multiple applications that can be taken ‘Out the box’ and be logging data within minutes:

Typical Applications

  1. OEM fleet durability testing.(on and off highway)
  2. Engineering development and powertrain calibration.
  3. Vehicle component testing.
  4. Bench testing.
  5. After-market customer care. (Collecting data on customer vehicles)

With Wi-Fi and 3G options you can keep connected.

Our data logger key features include:

  1. Dialog Configurator software is downloadable free of charge.
  2. Recorded data is stored on either a SDHC or SDXC card in PC readable format. No additional extraction tool or application is required.
  3. Silent mode is supported, listening on the CAN Bus with no interference.
  4. Power can be supplied from either the vehicle power or from the USB.
  5. The inbuilt real time clock with battery backup ensures that recorded data is timestamped.
  6. The Rebel data loggers support both a deep sleep mode and the WakeOnCAN function. These essential features of any flight recorder allows our data loggers to be left unattended on a vehicle without the risk of draining the vehicle battery.
  7. Our Rebel data loggers will operate at voltages below the rest of the vehicle electronic modules, so they will capture everything even during a cold start power up. (Input power range 4.5V to 36V)
  8. Module Analyser can be used for on-line UDS diagnostics and also CAN, LIN and FlexRay message Analysis.
  9. Compatible with applications written for the SAE J-2534 Pass-Thru protocol. You can use the Rebel data loggers with other third party software applications or your own applications.
  10. Communication channels include up to 7 CAN buses, K-Line, 3 LIN, LAN and 2 FlexRay channels
  11. Standard list of engine parameters can be acquired on almost all vehicles manufactured post 2007 model year.
  12. Options include highly accurate GPS, 3G, Wi-Fi and XYZ accelerometer.
  13. USB connection is isolated ensuring your data is protected.
  14. Documentation and Software can be downloaded at http://www.influxtechnology.com/downloads/

Supported Protocols
J1939, UDS (ISO14229, ISO15765-1, ISO15765-2), xCP (xCPonCAN, xCPonFlexRay), CCP

We offer a complete data logging solution for vehicle networks and sensor data.

Network Analyser and Diagnostics

A cost effective and professional CAN bus analysis and automotive UDS diagnostic tool.

Module Analyser is a 5 in 1 easy to use CAN bus analyser with the following advantages:

  1. Automotive OBD ISO15765-1 and ISO 15765-2 Scan tool and J1939 functions
  2. Automotive UDS support ISO14229
  3. Integrated ODX/MDX editor
  4. CAN bus, LIN and FlexRay analysis via DBC/LDF/Fibex files
  5. Data acquisition and logging

Key features include:

  1. Supports most Pass-Thru SAE J2534 hardware devices.
  2. Create and edit your diagnostic ODX files within Module Analyser.
  3. Supported file formats ASAM A2L, ODX, DBC, LDF and Fibex.
  4. Ability to capture and view CAN, LIN and FlexRay network traffic.
  5. Live signal CAN, LIN and FlexRay monitoring and recording.
  6. Data file exchangeable with include MS Excel®, Matlab®, NCode® and National Instruments®
  7. Configure and transmit periodic CAN messages.
  8. View data on oscilloscope and post analysis tool.
  9. Supports diagnostic OBDII scan modes.
  10. Advanced UDS diagnostic functions (ISO15765-1, ISO15765-2 and ISO14229).
  11. Scripting editor.
  12. Module reprogramming by ISO14229.

Instrumentation Solutions

The Influx Technology K series range is our new generation of automotive instrumentation modules. Highly accurate sensor measurement data is transmitted periodically on the CAN Bus enabling multiple modules to be connected together. The stackable K series range is an ideal solution for applications that require a large number of sensor data inputs recorded synchronously with vehicle network data.

The easy to use K series measurement modules can be applied, for measurement applications in power train, component testing, vehicle electronics, benchmarking etc.

Key features include:

  1. K-Box suitable for measuring analog, thermocouples, PWM and digital inputs.
  2. K-TC16 and K-TC32 suitable for measuring multiple thermocouple inputs. (K, J and T).
  3. K-Volt suitable for generating voltage, current, PWM and digital signals.
  4. Stackable ABS enclosure.
  5. Freely distributable configuration and calibration software.
  6. All devices have WakeOnCAN capability and power down mode.
  7. Integrates with any CAN interface device that supports the DBC file format.

All instrumentation is supplied with calibration software

Powertrain Calibration Management

Influx Technology LogiProject is an essential process tool for handling complex calibration projects with multiple variants. LogiProject helps control small and large powertrain calibrations, enables better teamwork collaboration and ensures full calibration traceability.

Prevent overwrites and produce conflict free datasets.

  1. Scalability from small calibration teams to large multi-functional organizations.
  2. Reliable data calibration management tool with powerful rule checking to prevent errors.
  3. Easy collaboration between engineering teams and the calibration administrator.
  4. Produce reliable calibrations faster, with automatically export of variant binary files.
  5. Full accountability of your calibrations.

Remote Fleet Management

Easy data streaming using Rebel data loggers gives you fleet management statistics and continuous streamed data all of the time. Using StreamLog you can see events as they occur in the field and react rapidly.

StreamLog is scalable so whether you have a small or large fleet there is a suitable option available.

Some of the benefits

  1. Avoid potential warranty costs – With early detection of DTC events
  2. Easy intuitive remote control – Fleet data logging is wirelessly controlled by StreamLog. Saving time and increasing the reliability of the testing process.
  3. Real time data streaming and position tracking – Real time tracking of data from the vehicle with synchronised positioning via GPS.
  4. Reports by email – StreamLog will automatically send you reports updating you on the latest fleet activity and statistics. Email alerts on events – such as DTC occurrences.

Real Data desktop HiL Simulation

Normally you would expect to capture only recorded data on a vehicle test. Influx Technology Replay provides a solution to recording real world data, replaying the data and extracting data from all functions. Even functions not recorded!

Using Replay you can extract the data over and over and UNDERSTAND everything.

Replay is a desktop HiL designed for the calibration. It does not rely on a plant model.

Advantages:

  1. Real World Data used for simulation, no inaccurate plant model.
  2. Small, compact and easy to operate
  3. Powertrain calibration investigations possible
  4. Easy to validate