Influx Technology has launched a USB dongle key for the Dialog Plus and Module Analyser software. Dialog Plus is our comprehensive and powerful Rebel data logger configuration and data analysis software suitable for DBC, OBD and J1939. Dialog Plus is used with A2L, ccp, xcp, ODX and has maps for the GNSS module. StreamLog is our popular remote data streaming service and is on a tab within Dialog Plus. All data is collected on the Rebel data logger SDHC card plus key data can be streamed via GPRS to get ‘live data’ * Dialog Plus is able to export your data in a range of formats for use in third party tools or as csv. Dialog Plus includes a useful batch processing tool. The USB dongle key will ‘unlock’ the Dialog Plus or Module Analyser software on the engineers PC.

Influx Technology Service Level Agreements

A single Dialog Plus licence can be used to run a fleet of data loggers and you will receive all software patches, updates and upgrades under a service level agreement plus the Rebel data loggers firmware (applicable after 12 months) The USB dongle can be purchased with 3 years of SLA updates or with life time SLA updates. Please call +44 (0)1767 262922 for pricing.  *allowing for transmission time
Influx Technology were pleased to meet our current and potential customers at Cenex-LCV 2018 held at the Millbrook Proving Ground. The Millbrook Cenex-LCV was busier than ever showing that it is the UK’s premier low carbon vehicle event. Influx Technology presented our range of products which make up the vehicle Influx Vehicle Fleet Calibration Data Cycle.
  • Comprehensive data is collected from a fleet of vehicles on the Rebel data loggers with key parameters transmitted to the engineers via StreamLog on 4G and network data via Wi-Fi using Microsoft Azure Cloud Servers. The Rebel data loggers have 100% CAN capture on up to 7 CAN buses and can store data up to 128GB on the removable SD.
  • The StreamLog data streaming has been developed over many years and offers fast sampling, all parameters stored on the Sd, key data streamed and the option to select and download other files of interest. The Rebel data loggers and StreamLog service have an excellent buffer to protect against loss of signal in remote areas or dense urban environments.
  • Influx Technology is now able to offer a range of data reports on your fleet vehicles including state of charge, driver behaviour and mileage accumulation.
  • The Rebel data logger data can be exported in a range of formats to 3rd party tools for further interrogation.
  • Collated data would then feed back to the calibration teams for development and modification as required.
  • LogiProject is Influx Technology’s calibration management software tool. Helping you to track the stage of your calibrations noting who, where , when and why aspects were changed. The latest calibration release can then be transmitted to the vehicle fleet for further testing and validation.
  • We are now back at the start of the data cycle! The data from the latest calibration can now be logged and transmitted for review.
I hope our Influx Vehicle Fleet Calibration Data Cycle is of interest to you and your projects. Feel free to contact us for further information or to discuss your requirements.  
The NEW K-Box Instrumentation Kit by Influx Technology Ltd is designed for accurate sensor measurement, with captured data being transmitted on the CAN Bus. The K-Box kit is an ideal solution for applications that require a quick set-up and collection of thermocouple, analog, digital and PWM inputs.
                                                                                                                                                                                                                                                                                                                                                                                                                      The K-Box CAN Bus settings, calibration and sampling rates are all easily configurable via our K-Cal software and stored in the K-Box even when not powered.
 
The complete kit contains the Influx K-Box, K-Bob breakout box, Kvaser™ Leaf Light, Kvaser T-Cannector, a 25way D-sub screw terminal, all connecting cables, complete instructions for use and a branded clam shell carry case.
 
Don’t miss out on the opportunity to obtain the K-Box Instrumentation Kit for just £1495 and save over £500 on RRP.
To find out more please contact us.
 
Influx sponsored Formula Student Team, AMZ Racing, have had great success at their latest event in the Netherlands. After completing a rigorous testing programme on and off the track, the team came first place in two competition events. This victory is the team’s first since 2014, winning the Driverless and Electric categories, and the first time that they have conquered two challenges in one race. Their next event is the season finale held at the Catalunya circuit in Spain. Congratulations and good luck to the AMZ Racing Team.
Influx Technology are pleased to announce Influx Asia has a new office in Beijing, China. Influx Technology has several customers in China and can offer local sales of the Rebel data loggers, a full range of automotive tools and comprehensive customer support.   Rebel data logger series This goes from strength to strength and now includes the Rebel 100 embedded data logger. The Rebel LT and Rebel CT loggers from 2 CAN to 7 CAN, are often used with the K-Box instrumentation to capture and synchronise analogue, digital and K type thermocouple data.   Dialog Plus software is a suite of tools which is comprehensive and powerful. The engineer can configure the logger, set triggers, plot GPS data on maps. analyse data, export data in a range of formats and use a time saving batch conversion tool.   Module Analyser is a useful CAN bus analyser and diagnostic tool used on a wide range of vehicles.   LogiProject is our Calibration Management Tool for small or large teams.   The Influx Replay® system is an innovative idea to replay real drive data on the bench. Please ask for a demonstration.   Influx Technology are always happy to discuss your requirements. Feel free to complete the ‘Contact Us’ form and get in touch.  
Influx Technology and Pragathi Solutions hosted a successful seminar on “data logging solutions” in Pune, India.   The meeting was well attended and introduced Dialog 5, Influx’s comprehensive data logger configuration and data analysis tool. Features include CCP, XCP, A2L files, sensor configuration, complex trigger set up, data merging and batch processing. The Rebel range of data loggers the K-box instrumentation and the Rebel Dash display were presented and demonstrated.   This included a live demonstration of “Stream Log” for remote logging, reconfiguring and data retrieval when the logger is out in the field.   The day finished with a useful question and answer session.   If you would like to find out more please contact Fiona at Sales@influxtechnology.com  
Out of the box Rebel data logger. Connect. Configure and Go!   Automotive Testing India   The market leading Rebel data loggers will be demonstrated at the Automotive Testing Show, Chennai April 20, 21 and 22.   Influx Technology will be there with our distributing partner Pragathi Solutions.   Products will include the Rebel CT (Compact), Rebel CT Analog and the Rebel CT FlexRay. Also the new improved Rebel LT (Lite) with stackable casing allowing users to connect with Influx Technology’s K-Box instrumentation. The Rebel Dash display visible even in bright sunlight is a ‘great solution for mounting in customer vehicles’.   You will have other opportunities to see Influx Technology at the China Automotive Testing Expo, Shanghai 27th, 28th, 29th September and the North American Testing Expo 2016 in Detroit on the 25th, 26th and 27th October.   We look forward to meeting our existing customers and hope to welcome new ones.
Highlights from day two
Influx Technology rebrands and introduces stackable dataloggers   This year’s Automotive Testing Expo North America is proving to be an exciting show for Influx Technology, located at booth 12010, with the company using day two to unveil its newly rebranded corporate image and debut its new K-Box analog and digital input logger and dash display. “This year we have rebranded the whole company image in order to get our selling points across better. Our message is ‘Out the box, connect, configure and go’,” says Fiona Keen, business manager.   The stackable K-Box is an ideal data capture solution for applications that require a large number of thermocouple and analog inputs. For example, 10 K-Boxes can be used to acquire data from 80 thermocouples. Accurate sensor measurement data is transmitted periodically on the CANbus, enabling multiple devices to be connected together. The K-Box CANbus settings, calibration and sampling rates are all easily configurable and can be stored in the K-Box even when not powered.   The system also works independently with our new Rebel Dash CAN display, which offers different modes, so data can be viewed in several ways. It is highly rugged, it can be used in cold and high temperatures, and it can be seen in bright sunlight, adds Fiona Keen.   rebel-dash-image01