CAN Bus Data Loggers
ReXgen AIR
Contact Us
4x CAN (CAN FD)/ LIN logger/ Interface
Includes: CAT 1 LTE remote data transfer and GNSS and 6D IMU, USB 2.0 Interface IP 50 enclosure.
From €655 / £574
2x CAN (CAN FD)/ LIN logger/ Interface
Includes: Dead reckoning GNSS and 6D IMU, x2 Digital and x2 Analog inputs, IP 65 enclosure.
From €427 / £375
2x CAN (CAN FD)/ LIN logger/ Interface
Includes: Secure 8/16 GByte eMMC data storage, x2 Digital and x2 Analog inputs, IP 65 enclosure.
€281 / £246
1x CAN logger/Interface
Includes: Secure 8GByte eMMC data storage, IP65 enclosure.
Rebel LT
Contact Us
2x CAN /3x Digital Channels/ 4x Analog Includes: 64GB SDHC data storage, Supports CCP, XCP, Diagnostics (OBD,UDS)
Rebel CT
Contact Us
4x CAN/3x Digital Channels/ 4x Analog/2x LIN
Includes: 64GB SDHC data storage, IP65 enclosure, Supports CCP, XCP, Diagnostics (OBD,UDS)
Rebel CT CAN FD
Contact Us
2x CAN/2x CAN FD/3x Digital Channels/ 4x Analog/2x LIN
Includes: 64GB SDHC data storage, IP65 enclosure, Supports CCP, XCP, Diagnostics (OBD,UDS)
Rebel CT 7 Flexray
Contact Us
7x CAN/3x Digital Channels/4x Analog/3x LIN/2x FlexRay Chnnels
Includes: 64GB SDHC data storage, IP65 enclosure, Supports CCP, XCP, Diagnostics (OBD,UDS), 18Hz GNSS
Instrumentation
K-TC Range
8,16,32 Thermocouples at 10Hz
CAN output and Standalone dataloging simultaneously. Free Configuration software. CAN/USB interface
8 Analog/ Thermocouple inputs, CAN output
3 Digital Inputs (PWM/Frequency/RPM) Software switchable voltage ranges. Free Configuration software
The K-Box kit contains everything needed to get the K-Box set up and tested on a workbench.
Includes: Kvaser T-CANnector, K-BoB, Kvaser T-CANnector, Kvaser LeafLight
K-AN8
8 Analog inputs
3 Digital Inputs (PWM/Frequency/RPM), CAN output, software switchable voltage ranges. Free configuration software
K-AN8 Kit
This K-AN8 (8 Analog + 4 Digital input) kit contains everything needed to get the K-AN8 set up and tested on a work bench.
K-Volt
CAN signal to voltage / current converter
CAN/USB interface, Configuration software Influx K-Cal for Windows
K-IEPE
Addon for connection of IEPE sensors to voltage input measurement devices K-Box or K-AN8
K-PT 100/1000
Addon for connection of PT-100/ 1000 sensors to voltage input measurement devices K-Box or K-AN8
K-Bob
An extension box that allows users to connect sensors to the Analog and Digital ports of K-Box or K-AN8, comes with BNC connectors
Accessories
CAN Interface Products
Rebel Dash
Standalone CAN Bus display. Supports Graphical.Numerical and Guage view. Free configuration software. Supports DBC. Configuration over CAN/USB Drive
Data Logger Cables
_edited.png)
Instrumentation Cables
Antennas
Interested? Get in touch!
+44 (0) 1525 842504
