top of page

CAN interface products

Kvaser Leaf Light v2, Kvaser T-Cannector & Rebel Dash

Leaf Light HS v2
T-Cannector v2
Rebel Dash
 The Kvaser Leaf Light HS V2 supports high speed USB for CAN and offers high performance at low cost. Loss free transmission and reception of standard and extended CAN messages on the CAN bus is transmitted with a time stamp precision of 100 microseconds.

Key Features:

■ The Kvaser Leaf Light HS V2 is a high speed USB interface for            CAN that offers loss free transmission and reception of standard      and extended CAN messages on the CAN bus.


 8000 messages per second, each time-stamped with 100                  microsecond accuracy


 Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active)          identifiers


 High-speed CAN connection (compliant with ISO 11898-2), up        to 1 Mbit/s.


■ Galvanic isolation, previously a more expensive option on                  Kvaser's original Leaf Light, now comes as standard on the Leaf        Light v2, enhancing protection from power surges or electrical          shocks.


 Low current consumption (70 mA) reduces power drain from            your laptop.


Local buffering and preprocessing results in high performance           and a reduction of time critical tasks for the PC.

Module Analyser, 5 in 1 easy to use CAN bus analyser
Module Analyser Lite
Module Analyser Standard
Analysis & Benchmarking

Module Analyser Lite, connect to the Rebel loggers and view CAN network traffic in real time.


‘Module Analyser Lite turns the Rebel data loggers into a powerful CAN and LIN network data analyser.’


Module Analyser is our ‘free of charge’ CAN and LIN network analyser supplied with every Rebel data logger. A powerful 5 in 1 easy to use CAN bus analyser offering the following advantages:


CAN and LIN monitoring via DBC/LDF file.

■ Automotive OBD ISO15765 Scan tool and UDS ISO14229


 Integrated ODX/MDX editor.

 Data acquisition and logging.

Why use Module Analyser?

Typically CAN network analysis tools require you to use separate applications for automotive functions such as J1939, UDS diagnostics, module reprogramming and CAN monitoring. Module Analyser brings these features together in a single environment. For example, monitor CAN messages, CAN signals, read PID’s and DTC’s…. 

bottom of page