top of page
K-CAL banner.jpg

K-CAL 

Free sensor measurement and calibration software

​

 

K-CAL is a freely distributable Windows PC application that accompanies all the K-Series products from Influx. K-Cal software is specifically designed to ensure you harness the full potential of all the K-series devices with precision and convenience.

​

Effortlessly configure your connected K-Series device using our user-friendly application K-CAL, or explore data analysis with the dynamic live view function.

​

Influx K-Cal offers powerful features that enable you to set byte orders, adjust unit measurements, set baud rates, and optimise power consumption through configurable sleep modes.

​

K-CAL lets you do everything from the unified export of DBC files for post-processing to real-time data visualisation on the oscilloscope to saving and exporting that data from the oscilloscope.

Overview

A freely distributable Windows PC application accompanies the K-TC. The Influx K-Cal software is specifically designed to ensure you harness the full potential of the K-TC with precision and convenience. With K-CAL, you can;

​

  • Customise CAN bus settings

  • Configure up to five TC devices at once 

  • Adjust sampling rates seamlessly

  • Decide the byte order – Motorola/ Intel

  • Change the unit of measurement according to your needs

  • Change CAN ID according to the requirement

  • Configure sleep mode for power-saving

  • Export DBC of instrumentation devices for post-processing

  • View live data in oscilloscope and export data in ‘.csv’, ‘.mat’ and ‘.dat’ format

  • Configure the thermocouples type (K, J, & T)

  • Streamline input calibration and setup

  • Compatible with K-TC, K-AN and K-BOX

K-Cal chart showing temperature data close up
HIGHLIGHTS

HIGHLIGHTS

Live View

  • Verify the functioning of the sensors in real-time

  • View data in real-time and export on need

  • Save data to the oscilloscope

  • Export data from the oscilloscope

DBC.jpg

Exporting DBC File On K-CAL

  • Configure the K-Series devices with any CAN device

  • Rename channels: Ideal solution for applications that require a large number of thermocouples

  • Accurate sensor data is transmitted periodically on the CAN bus, enabling multiple devices to be connected and exporting combined DBC files

  • Output signals via CAN to the Rebel Dash display

Easy Calibration​​

Influx's thermocouple measurement devices can be professionally calibrated (on demand) and certified using the Influx K-Cal software.

 

Calibration is vitally important. Calibration keeps the device's functionality and accuracy in check and gives users and businesses confidence in the results that they monitor, record and subsequently control. 


Contact our support team to get your thermocouple device calibrated and certified.

  • What are the supported data formats?
    CSV, MF4, MAT, ASC, blf
  • CAN we monitor live data?
    Yes, options for Live trace are available.
  • Is it possible to have 4 channels CAN FD?
    Yes, there are separate products supporting that function.
  • What are the main features available with ReXdesk?
    CAN live view, filter, trigger, sleep modes, DBC option.
  • Why is ReXgen not getting interfaced with the RexDesk?
    Please ensure that you have installed the driver. If not, you can find it under the Influx technology folder under the start menu
  • What happens if the logger storage gets full?
    The logger can continue logging after deleting the first file on a FIFO basis or can stop logging and be configured via ReXdesk, which has the option to format the logger. (FIFO is enabled by default.)
  • Is it possible to interface ReXgen 2 with KBOX?
    Yes, It will work with Kbox, but you will need to power the KBox from a separate power source since ReXgen doesn’t have Auxilary Power Out
  • Where can I find the Pinout details for ReXgen 2?
    You can find that under the help section in the ReXdesk software
  • Where can I get the Driver installation process?
    It is available under the Influx Technology folder in the Start menu. If it is not available there, then please install it from the Influx Technology support page. https://www.influxtechnology.com/support
  • What is the current consumption of ReXgen 2?
    <87mA in full operation and <2mA when CAN is not active
  • How to get real-time physical data?
    ReXgen doesn't provide real-time physical data, the user will have to retrieve the data log and post-process using a DBC file to view the physical data
  • Where can I find the Pinout details for ReXgen 2 IMU?
    You can find that under the help section in the ReXdesk software
  • What is the GNSS accuracy for ReXgen 2 IMU?
    2.5m CEP
  • What is the current consumption of ReXgen 2 IMU?
    <87mA in full operation and <2mA when CAN is not active
  • What happens if the logger storage gets full?
    The logger can continue logging after deleting the first file on a FIFO basis or can stop logging and be configured via ReXdesk, which has the option to format the logger. (FIFO is enabled by default.)
  • Is it possible to interface ReXgen 2 IMU with KBOX?
    Yes, It will work with Kbox, but you will need to power the KBox from a separate power source since ReXgen doesn’t have Auxilary Power Out
  • Are there any other connectors available apart from DB9?
    No, But modifications can be done for bulk orders on demand.
  • Where can I get the Driver installation process?
    It is available under the Influx Technology folder in the Start menu. If it is not available there, then please install it from the Influx Technology support page. https://www.influxtechnology.com/support
  • How to get real-time physical data
    User needs to use the DBC file, and post-collection, it can be exported as CSV
  • Does the ReXgen logger LEDs indicate the status of GNSS logging
    No. It is advised to wait 2 Mins before starting your trial, to a minimum number of 4 satellites.
  • Why does it support only DBC?
    The logger is only capable of logging CAN signal.
  • Is it possible to see a live trace with ReXgen 2 IMU?
    Yes
  • Where can I find the Pinout details for ReXgen Air?
  • What is the current consuption of ReXgen Air?
    <300mA in full operation and <2mA when CAN is not active
  • What happens if the logger storage gets full?
    The logger can continue logging after deleting the first file on a FIFO basis or can stop logging and be configured via ReXdesk, which has the option to format the logger. (FIFO is enabled by default.)
  • Can we interface ReXgen with KBOX?
    Yes, It will work with Kbox, but you will need to power the KBox from a separate power source since ReXgen doesn’t have Auxilary Power Out
  • Where can I get the Driver installer?
    It is available under the Influx Technology folder in the Start menu. If it is not available there, then please install it from the Influx Technology support page. https://www.influxtechnology.com/support
  • How to get real-time physical data?
    ReXgen doesn't provide real-time physical data, the user will have to retrieve the data log and post-process using a DBC file to view the physical data
  • Why is my ReXgen AIR not uploading data to FTPS server?
    There could be several reasons: 1) Ensure that the SIM card is active and has sufficient data 2) Ensure that the GPRS/LTE antenna is connected to the Logger 3) Check the Server and APN settings of the logger
  • Will I be supplied a SIM card
    No SIM card will be supplied. Most standard SIMs are suitable. If in doubt please ask our support team.
  • CAN we monitor live data?
    Yes, options for Live trace are available.
  • Why my logger is not getting Detected?
    Make sure that the ReXgen Driver is installed on your computer; refer ReXgen Support page for instructions.
  • Why is ReXdesk not opening after installation?
    Make sure that Visual C++ Redistributable x64 is installed.
  • Why does exported CSV data have gaps in it?
    ReXdesk Doesn’t export data after Interpolation or Resampling; the data is recorded and timestamped as received from the CAN bus. The gaps will be due to the difference in the transmission rate of various CAN messages.

FAQ

bottom of page