+44 (0) 1525 842504
Accurate analog, digital and temperature sensor measurement data for CAN applications.
The K-Box kit contains everything needed to get the K-Box set up and tested on a workbench, eliminating the need for a CAN bus.
To help with connecting sensors to the analog and digital ports, the K-BoB enables easy connection with BNC connectors.
Influx K-Cal is easily connected via the Kvaser LeafLight interface and Kvaser T-CANnector.
This kit is supplied in the Influx carry case.
Our versatile K-Box Kit is a cost-effective solution to measure multiple sensor types within one module. Ideal for applications that will measure temperatures, pressures, voltages, currents (using a current clamp), PWM, RPM, digital counters or IEPE sensors.
Multiple K-Series modules can be stacked, connected and configured to work together. All K-Series instrumentation modules allow the measurement of signals and the periodic transmission of sensor measurement data on the CAN 2.0 network.
■ Up to 8 K-type connections at up to 10 Hz sampling rate
■ 8 Analog inputs with variable input sampling rates (8 channels at 1k Hz, 4 channels at 5k Hz)
■ PWM: 3 inputs frequency measurements, counters or pulse measurements
■ Outputs: 4 Relay outputs (Optional)
■ Regulated +5V and +24V output power supply for external sensors
■ Supplied with configuration software, Influx K-Cal for Windows® and configurable via a DBC file
■ Instrumentation data time synchronised with recorded vehicle network data via CAN
■ Galvanic isolation between modules (enclosure, power, CAN BUS and analogue input module and thermocouple input module).
■ Measurement accuracy: +/- 1 degree C, Measurement resolution: 0.1 degree C
■ Analogue channel over-voltage protection +/- 150 Volt
■ Stackable ABS enclosure
K-Cal, the all in one K-Series instrumentation tool.
K-Cal is freely distributable and supports all K-series modules.
■ Calibrate sensor channels and output calibration reports
■ Set CAN Bus baud rate and message identifiers
■ Set individual signal channel configuration and scaling, using formulas and tables
■ Set signal sampling rates
■ Construct, Edit and Export DBC files for CAN bus data
■ Monitor signals live with a graphical window