+44 (0) 1525 842504
Connect PT100/PT1000 sensors to K-Box or K-AN8
Connect PT100/PT1000 sensors to K-Box or K-AN8.
Our K-PT module is designed to connect up to PT100/PT1000 sensors and simply provides an output voltage signal. Thus enabling the most standard voltage measurement devices to work with PT100/PT1000 sensors. The PT100 sensors offer excellent accuracy and repeatability.
The K-PT add-on module can be connected directly with our K-Box and K-AN8 analog measurement modules using a 25-way cable.
■ Connects up to 4 RTD sensors to the K-Series K-Box/K-AN8 via the analogue inputs.
■ Simple signal configuration using a DBC file.
■ Supplied with configuration software Influx K-Cal for Windows®
■ Refresh rates achievable (4 channels 100 Hz)
■ ABS enclosure
K-Cal, the all in one K-Series instrumentation tool.
K-Cal is freely distributable and supports all K-series modules.
■ Calibrate sensor channels and output calibration reports
■ Set CAN Bus baud rate and message identifiers
■ Set individual signal channel configuration and scaling, using formulas and tables
■ Set signal sampling rates
■ Construct, Edit and Export DBC files for CAN bus data
■ Monitor signals live with a graphical window